Ablution Container Toilet & Shower | FOB $2,200
Ablution container with toilet and shower cubicles for labor camps and sites. 20ft unit, separate male and female sections, water tank and drainage ready.
Price shown is FOB China — ocean freight, import duty, VAT and site installation are not included. Freight is quoted per container (16 flat pack units per 40HQ).
Based in Suzhou, China
Sustainable materials · No MOQ · Worldwide shipping
Factory in Suzhou, China
Designed with the planet in mind, all our products are committed to sustainable practices.
Product Description
6000 x 3000 x 2800 mm (20ft), multi-cubicle layout · Container body conversion with internal partition walls and service void · 50mm Rock Wool Sandwich Panel, A-grade fireproof; antibacterial internal lining · 15-20 Years · Pre-assembled, connect utilities on site
An ablution container is the mandatory companion to any dormitory block. No camp is approved without sanitary facilities — and on remote sites, prefabricating the whole block off site is what makes the sanitary provision predictable.
What is an ablution container?
Definition: A 20ft container converted into a toilet and shower block with separate male and female sections, arriving pre-plumbed and pre-wired. Also known as: toilet and shower container, portable toilet block, camp ablution unit, site sanitary container.
Product overview
The container body is divided internally into male and female sections, each with its own entrance. Cubicle partitions are moisture-resistant panels with an antibacterial finish, and the floor is laid to falls so that all water reaches the waste outlet — no ponding, which is the usual failure point of site-built sanitary blocks.
Ventilation is mechanical, with exhaust fans and louvred vents fitted with insect mesh. This matters in tropical and desert camps where still, humid air inside a cubicle is the most common complaint from workers.
Configurations
| Configuration | Toilets | Showers | Typical use |
|---|---|---|---|
| Toilet only | 6-8 cubicles | — | Sites with separate shower block |
| Shower only | — | 6-8 cubicles | Sites with separate toilet block |
| Combined | 4 | 4 | Most common labour camp unit |
| Toilet + shower + laundry | 4 | 4 | Larger camps, single-service block |
Male and female sections can be equal, or weighted to the workforce ratio. Where a camp runs male-only shifts, a single unisex block with external access is often the practical choice.
Two finishes
- Colourful corrugated version — painted corrugated cladding, used where the block is visible to the public: scenic areas, tourist sites, event venues, municipal facilities.
- White version — plain white panels, the standard for construction and mining camps where the block sits inside the site boundary.
Both use identical internals; only the external finish differs.
Applications
Labor camps, construction sites, mining camps, scenic areas and public facilities, and temporary event sites.
Complete the camp
Ablution containers are normally ordered alongside our K-type dormitories and site guard houses, all from the same camp and utility range. Colours and finishes match across the camp and everything ships in one consignment. Tell us your headcount and shift pattern and we will size the sanitary provision for you.
Guide: container toilet configurations and price range — male, female, accessible and shower layouts with indicative FOB prices.
Four Key Advantages
Fast Assembly
Pre-fabricated and modular design allows rapid on-site deployment: the shell assembles in 2-4 hours, and most units are fully deployed within 24-48 hours, minimizing labor costs and project timelines.
Cost-Effective Shipping
Optimized flat-pack design drastically reduces shipping volume. Multiple units can be loaded into a single container, saving up to 75% on international freight costs.
Built to Last
Corrosion-resistant galvanized steel frame with premium insulation. Engineered to withstand extreme weather, from scorching deserts to freezing mountains.
Stackable Design
Up to 3 stories with structural integrity. Modular connection system enables flexible expansion as your needs grow over time.
Full Specifications
| Specification | Detail |
|---|---|
| Product Name | Ablution Container Toilet & Shower | FOB $2,200 |
| Dimensions | 6000 x 3000 x 2800 mm (20ft), multi-cubicle layout |
| Layout | Separate male and female sections; mixed cubicle configurations available |
| Structure | Container body conversion with internal partition walls and service void |
| Wall Material | 50mm Rock Wool Sandwich Panel, A-grade fireproof; antibacterial internal lining |
| Floor | Anti-slip floor with drainage falls to waste outlet |
| Door Type | Individual cubicle doors with locks and occupancy indicator |
| Windows | Louvre vents with insect mesh; mechanical exhaust fan |
| Electrical | Pre-wired 220V/110V, LED Light, Exhaust Fan, Socket |
| Service Life | 15-20 Years |
| Installation Time | Pre-assembled, connect utilities on site |
| Applications | Labor Camp, Construction Site, Mining Camp, Scenic Area, Public Facility, Event Site |
- Design life
- 15–20 years
- Fire rating
- Class A (rock wool panel)
- MOQ
- 1 set
- Lead time
- 7–15 days after deposit
- Payment
- T/T 30% deposit, 70% before shipment; or L/C
- Daily capacity
- 500 units (Suzhou plant)
- Container loading
- Per model — ask
- Certificates
- ISO 9001 · 45001 · 14001 — view at /about/
Specifications and options
| Category | Standard | Optional | Why it matters |
|---|---|---|---|
| Wall panel | 50 mm rock wool | 75 mm or 100 mm | 50 mm suits ≥0 °C markets; 100 mm for −20 °C |
| Roof panel | 50 mm rock wool | 75 mm | Roof gain dominates cooling load in hot climates |
| Floor | 18 mm fire-rated board | 20 mm | Point loads from equipment and heavy furniture |
| Frame | Galvanised steel, 2.0 mm | 2.5 mm | Coastal and high-wind sites need the heavier section |
| Glazing | Single glazed, UPVC or aluminium | Double glazed | Condensation and noise control in cold or wet climates |
| Electrical | Lighting and sockets, pre-wired | AC pre-wiring, extra circuits | Diagnostic or kitchen equipment needs its own circuit |
From the factory gate to your site
| Step | What it adds | Figure |
|---|---|---|
| EXW (ex-works) | Goods at the factory gate, nothing else | FOB − US$62.5/unit at 16 units per 40HQ |
| FOB | Inland haulage to port and export clearance | The published FOB range above |
| CIF | Ocean freight and insurance to your port | FOB + US$181–544/unit (eight lanes, see the landed cost index) |
| Duty and VAT | Assessed on CIF value by the HS code your agent files | Not included — paid at destination |
| Installation | Foundation, lifting, assembly, utility hook-up | Our crew for Jakarta stock; quoted elsewhere |
The only steps that move with your project are freight and installation. Everything before them is fixed by the unit you choose — which is why we separate them here instead of quoting a single delivered number.
What the price includes, and who does what
FOB covers the building at the port of loading. Everything after it is arranged by someone — the table below states who, so a quotation can be compared line by line.
| Model | Size (mm) | FOB price (USD) | MOQ | 40HQ loading |
|---|---|---|---|---|
| Ablution Container (Toilet & Shower) | 6000 x 3000 x 2800 mm (20ft), multi-cubicle layout | On request | 1 set | Per model — ask |
EXW is US$1,000 per 40HQ lower than FOB (the factory-to-port leg): about US$62.5 per unit at 16 units per 40HQ.
Who arranges what
| Layer | What it covers | Who arranges it |
|---|---|---|
| Production and loading | Build, trial assembly, container loading plan | EasiHive |
| Ocean freight and insurance | Port of loading to destination port, typically 25–40 days | EasiHive (quoted as CIF) or your forwarder |
| Import duty and VAT | Assessed on CIF value by the HS code declared at import | Your importer of record |
| Port handling and clearance | Terminal charges, agent fees, demurrage risk | Your clearing agent |
| Inland haulage and offloading | Port to site, crane or forklift at destination | Your contractor, or arranged on request |
| On-site assembly | Unpacking, assembly, utility hook-up | EasiHive crew for stocked units from Jakarta; remote guidance elsewhere |
Duty percentages are not published: the rate depends on the HS code your agent files and the value assessed at the port. We ship under a stated HS code and provide a commercial invoice that matches the packing list.
Request a Quote
Fill out the form and our team will get back to you within 24 hours.
Engineering Reference
Full engineering specification, load tables and U-values for all four product types — read the Container House Technical Guide.
What this model costs delivered to your market
Includes ocean freight, duty and delivery. Excludes local taxes, foundation and site works.
| Market | Main port | Landed price (USD) |
|---|---|---|
| United States | Houston / Long Beach | $4,350–$6,300 |
| Australia | Sydney / Melbourne | $4,300–$6,300 |
| New Zealand | Auckland / Tauranga | $4,750–$6,800 |
| United Kingdom | Felixstowe / Southampton | $4,400–$6,450 |
| Ghana | Tema / Takoradi | $5,050–$7,350 |
| Sri Lanka | Colombo / Hambantota | $4,850–$7,050 |
| Malaysia | Port Klang / Penang | $3,400–$5,300 |
| Philippines | Manila / Cebu | $4,050–$6,150 |
| UAE | Jebel Ali | $3,650–$5,650 |
| Singapore | PSA Singapore | $3,200–$5,100 |
Indicative ranges — your quote breaks each line down by port, quantity and current freight rates.
